|
Ⅰ . General Introduction: (Kindly reminder: Please click back to homepage to know more about comparison of different equipments and service information)
This series has its own independent innovation intellectual property and proprietary technology with advanced design, producing, novelty, efficiency, power conservation and unique characteristics, especially suitable for heavy weight mixing material with high mixing uniformity.
Scope of application
I t's s uitable for mixing of chemical, mine, coating, resin, glass silicon, construction material, dye, pesticide, chemical fertilizer, forage, feed additive, wheatmeal, milk powder, perfume, microscale component, coffee, aginomoto, salt, detergent, plastic and drying and mixing for all kinds of sizing agent and powder.
Operating principle
WZ-agravic particle mixing machine can satisfy the client's requirements with intense and effective mixing. The two mixer shaft s inside the cylinder revolves reversely rotate. The special installation on the mixer shaft will make sure the materiel move in the radial, circle and axial directions to form compound cycle in order to mix uniformly in short time. The sprayer set on the cover is used for mixing between solid and liquid material.
Structural features
• It can be used for solid-solid (powder and powder) mixing, solid-liquid (powder and liquid) mixing, drying and reaction equipment. We can also design and customize according to client's requirements.
• The material is in the weightless state by the mechanism inside the machine leading a wide range of convection and spread to achieve uniformed mixing. It is suitable for a wide range of material without causing layering to heavy and big particle. It can achieve high precision solving the problems of other kind of mixing machines.
• High mixing accuracy. When the matching is 1:1000 between solid-solid, the standard deviation is 3/100,000-8/100,000; content passive deviation <2% (mutagenic factors).
• High speed of mixing. Generally, 1 minute for mixing of solid materiel.
• Low power consumption, which is 1/4-1/10 of usual mixing machine. It can be operated with closeness and is also with reliable revolving and convenient maintenance.
• Several mode of discharging: manual operation, motor driven and air drive.
Technical parameters ：
|
Type M³ |
Total volume (M³) |
Load factor |
Motor power (KW) |
Overall dimensions(mm) Maximum diameter × height |
Weight of equipment(kg) |
|
WZ-0.05 |
0.05 |
0.4-0.6 |
1.5 |
1290×660×837 |
230 |
|
WZ-0.2 |
0.2 |
0.4-0.6 |
4 |
1124×1110×720 |
260 |
|
WZ-0.4 |
0.4 |
0.4-0.6 |
4 |
1400×1250×1030 |
450 |
|
WZ-0.5 |
0.5 |
0.4-0.6 |
7.5 |
1450×1500×950 |
800 |
|
WZ-1 |
1 |
0.4-0.6 |
11 |
1800×1800×1350 |
1150 |
|
WZ-1.5 |
1.5 |
0.4-0.6 |
15 |
1850×1950×1180 |
1500 |
|
WZ-2 |
2 |
0.4-0.6 |
18.5 |
2200×2400×1600 |
2800 |
|
WZ-2.5 |
2.5 |
0.4-0.6 |
18.5 |
2300×2300×1620 |
4200 |
|
WZ-4 |
4 |
0.4-0.6 |
22 |
2680×2400×1850 |
4500 |
|
WZ-5 |
5 |
0.4-0.6 |
37 |
2950×3050×2040 |
6000 |
|
WZ-6 |
6 |
0.4-0.6 |
45 |
3050×3250×2100 |
7000 |
|
WZ-10 |
10 |
0.4-0.6 |
55 |
3550×3150×2400 |
8000 |
|
WZ-13 |
13 |
0.4-0.6 |
55 |
4695×3180×2500 |
10500 |
|
WZ-15 |
15 |
0.4-0.6 |
55 |
4180×3960×2600 |
10000 |
|
WZ-18 |
18 |
0.4-0.6 |
75 |
5700×3700×2500 |
13000 |
The material of above product is carbon steel C, stainless steel P. Detailed data can be found in the operating instruction manual.
| 
